At TRA-Mage, our Snow Brackets™ are engineered from the fail point of the roof system. Through proper testing and research, we have developed unique engineered charts. These charts calculate the number of snow brackets required and their correct distribution as provided in a roofing square layout based on the roof surface type, sheathing type and thickness, snow load, and roof slope. Brackets are available in copper, aluminum, paintlock steel, and painted steel.

---

NOTE: PLACE BRACKET AT AN EXPOSURE OF 5.5 INCHES. DRILL HOLES THROUGH ROOFING AND SHEATHING USING EXISTING HOLES IN BRACKET. REMOVE BRACKET. INSTALL CAULKING IN HOLE AND LENGTH OF BRACKET. PLACE BRACKET AND SCREW USING PREVIOUSLY DRILLED HOLES. APPLY CAULKING TO CLIP AND SLIP ON BRACKET. Bracket H is used on: Standing seam, metal panel and retro fit on asphalt shingle roofs. Snow Bracket Installation Guide Installation Chart for Asphalt ShingleRoof: 7/16" Wafer Board Installation Chart for Asphalt Shingle/Metal Roof: 5/8" Plywood Installation Chart for Asphalt Shingle/Metal Roof: 3/4" Plywood Snow Bracket Technical Guide