TRA-Mage, Inc. - Roof Flashing System

Aluminum Roll-Product Information:

Metal

highly durable and weather resistant
maximum formability and long term functionality
fully recyclable

Continuous Corrugation

stretching factor of 30%
conforms to roof surface
suitable for hip application
easy installation
no tools necessary

High Quality Color Coating

durable UV resistant
available in many colors (RAL)

Butyl Adhesive Strips

additional security against driving rain and snow

Technical Information

body: aluminum corrugated and colored
width: 9 in. / 11 in. / 15 in.
length: 25 ft. per roll
standard colors: red, brown, black

Application Steps:
General Information- FlexSeal™ should overlap 2 inches. Roof tile must be clean and dry. Air temperature should be at least 40° F.

		Step 1 Center FlexSeal™ on top of roof nailing board. Staple or nail FlexSeal™ every 12 inches down hip or ridge nailing board.
		Step 2 Form FlexSeal™ to tile roof surface. Install FlexSeal™ from top of hip to eave.
		Step 3 Remove protective strip from adhesive tape.
		Step 4 Press FlexSeal™ in pans of each tile. FlexSeal™ can elongate 30% from barrel to pan. Take care that the edge area of the FlexSeal™ is thoroughly pressed to tile for optimal adhesion.
		Step 5 Cut off excess amount of FlexSeal™ at end of hip or ridge with knife or sheet metal shears. The excess material can be used on the next project.

Call for more details!
(800) 606-8980