Application Steps:
General Information- Substructure must be clean and dry. Air temperature should be at least 40° F.

		Step 1 Cut product long enough to allow 1 inch to be folded over front flashing. (See Picture)
		Step 2 Fold extension of the side-lap over front flap and press standing seam against chimney wall. (See Picture)
		Step 3 Install FlexFlash™ counter flashing over FlexFlash™ and secure to wall or chimney with screws.
		Step 4 Seal upper seam with sealing compound.

Call for more details!
(800) 606-8980